Menu

Product Recall: Motex SD008 Plug-In Energy Saving Device (2204-0026)

Product details

Published5 May 2022

The hazard

Product Recall for Motex SD008 Plug-In Energy Saving Device presenting a serious risk of fire and electric shock.

Product description

Summary Product: Motex SD008 Hazard: The product presents a serious risk of electric shock and fire as it does not bear a plug compliant with BS1363. Corrective action: Mandatory recall of the product from end users Product information Type Electrical appliances and equipment – Plug-in energy-saving device Model SD008 Country of Origin China Product description White energy saving UK plug in device with a bright green strip light at the bottom Product Report and Image Link to product image and PDF Hazard The product presents a serious risk of electric shock and fire due to multiple test failures which included the following. The product does not bear a plug compliant with BS 1363. The earth pin and live and neutral pins are not straight and are too short. The product has weak plug pins that are liable to break off in the socket-outlet. The product was fitted with a large, unmarked capacitor which was only connected to the neutral side of the circuit, despite the manufacturer’s energy saving claims. The device was fitted with a fuse on the PCB, presumably to protect the other components on the PCB however, the fuse was of the low breaking capacity type and is likely to explode in the event of a short circuit. The product also claimed to have lightning or spike protection. Testing revealed it did have a Varistor (MOV) fitted, however the varistors were incorrectly specified and were not fitted with adequate protection for this device. Varistors are also known to degrade after prolonged use. When varistors are specified incorrectly and not provided with proper protection (as is the case here) the result is in an increased fire risk. The product does not meet the requirements of the Electrical Equipment (Safety) Regulations 2016. Corrective action OPSS are requiring the recall of the product from end users. We recommend owners stop using this product immediately. Contact the distributor you purchased from to request redress. Additional information PSD case numbers: 2204-0026 Notified by: Office for Product Safety and Standards

What should you do?

Check the brand, model and batch number or barcode against your product. If it matches, stop using it, unplug it and follow the measures above, or contact the seller or manufacturer. Keep the product and your receipt until you know whether you can get a refund, repair or replacement.

Official notice ↗ · Source: Office for Product Safety and Standards (OPSS)

More recalls in this category

Recalls by year